Siemens Gigaset 4000 Comfort Operating Instructions Manual Download Page 21

Page: 21 / 116

Time functions

Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619

Zeitfunktionen.fm

4.9.02

Step

step

Time functions

Your Gigaset will support you in organising your schedule like a clock, with an
appointment reminder and alarm function.

The date and time will be set automatically when the first outgoing call is
made.

Set date and time

The date and time setting is required for correctly displaying the arrival time of
messages/calls.
You can also set the mode for the time. Choose between a 12-hr (

)

and a 24-hr display.

Press

for selection menus.

Select using [

] and [OK ]:

Calendar/Clock

→

Date/Time

The current setting will be displayed.

Enter the date in the specified format » - - . - - . - - « day/month/year.

Use [

] to select [Time], and enter this in the format » - - : - - « hours/minutes.

The factory setting is a 24-hr display. If

is shown next to the time, it

means the 12-hr display is active. If you have already selected the “Time” line,
you can change over from

using the left-hand display key.

Use [

] to select [Mode]: choose between a 12-hr and a 24-hr display mode if

necessary.

Select using:

Save

Summary of Contents for Gigaset 4000 Comfort





















































































































Search results

Summary of Contents for Gigaset 4000 Comfort

Reviews:

Related manuals for Gigaset 4000 Comfort

Brands by name

Popular brands

Siemens Gigaset 4000 Comfort, Operating Instructions Manual

Search results

Summary of Contents for Gigaset 4000 Comfort

Reviews:

Related manuals for Gigaset 4000 Comfort

Brands by name

Popular brands