29
Setting up ISDN call numbers (MSN)
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619
MSN.fm
4.9.02
Step
by
step
Setting up ISDN call numbers
(MSN)
Your ISDN connection provides you with 2 phone lines (B-channels) that can be
used at the same time. You can set up a maximum of 10 own call numbers
(MSN) on your base station. If you have not yet stored all the call numbers us-
ing the installation assistant (see page 26), you can do this now.
All call num-
bers stored subsequently will automatically be assigned to all registered
handsets
.
Set up call number (MSN)
Every newly set up call number will
automatically
be given its own ringer mel-
ody, which you can change individually. This will allow you to tell straight away
from the ring tone who the call is intended for.
Press
*
for selection menus.
Select using [
] and [OK ]:
Base Settings
→
Settings
→
ISDN settings
→
Set up MSN
.
Select using [
] and [
|
]:
(required MSN)
.
Select using [
] and [OK ]:
Edit entry
.
In this menu, you also have the option of setting another ringer melody and of
deleting or displaying the entry.
Enter new
or
modified MSN and/or names and confirm with [
|
].
Select using [
] and [OK ]:
Save entry
.
Assigning call numbers (MSNs)
You can now assign the registered handsets the previously set up call numbers
(MSN). In doing so you will specify
●
the call numbers (there can be more than one) under which a registered ter-
minal will ring (
receive MSN
),
●
the call number from which an internal subscriber should dial (
outgoing
MSN
). You can set one outgoing MSN for each internal subscriber. This
MSN is displayed to the called party and any call charges incurred are as-
signed to the appropriate subscriber (see also the table on page 24).
Assigning an incoming MSN
A newly registered handset will ring under all configured call numbers. If you
want to assign a specific incoming MSN to the handset:
Press
*
for selection menus.
Select using [
] and [OK ]:
Base Settings
→
Settings
→
Setup user
→
Setup device
.
Select using [
] and [
|
]:
(required internal subscriber)
.
Select using [
] and [OK ]:
Receive MSN
→
(relevant MSN)
.
Now use [
] and [OK ] to activate the required
Receive MSN
(
9
in front of the menu item = ON/without = OFF).
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
