manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 72 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 72

3-4         

ACUSON

 Freestyle User Manual

Setup

How to Select Items from the Setup Menu

There are several ways to select an item from the 

SETUP

 menu list: 

 

■

Turn the large, outer Rotary knob to highlight an item, then turn the small, inner Rotary knob 

to activate it. 

 

■

To move left/right, back/forth turn the inner Rotary knob.

 

■

Use the Trackball which controls a pointer to highlight an option, and then touch the left 

Trackball key to activate it. 

 

■

Use a compatible USB mouse for these controls (plug the mouse into one of the USB ports 

on the I/O Panel; for more information see “Console Inputs/Outputs Panel” on page 1-5). 

If an item in the Setup list has sub-pages, a pop-up window will display the additional choices. 

Activate this pop-up window with the inner Rotary knob. The outer Rotary knob scrolls through 

this list, and the inner knob activates a selection.

P          S

XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX

XXX

XXX

XXX

XXX

Xxxx
Xxxxxx
Xxxxxxxx
Xxxxxx
Xxxxx Xxxx
Xxx Xxxxxxx Xxxxx
Xxxxx Xxxxx

Xxxx Xxxxx
Xxxxxxx
XXXXX

XXXX
Xxxxxxx Xxxxxxxxxx
Xxxxxxxx
Xxxxxx

   

Setup Menu and Sub-Menus; there are several ways to select items from the menus

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments