manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 64 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 64

2-44         

ACUSON

 Freestyle User Manual

Safety and Care

ACUSON Freestyle Rollstand Configuration

WARNING: 

When operating and transporting the ultrasound system using the ACUSON Freestyle 

Rollstand, insure that the rollstand is configured according to the specifications provided 

in this manual. Failure to do so can cause the system to tip over and create a risk for 

injury to the user or patient and damage to the system. 

5

7

2

4

6

1

3

Rollstand Configuration

1.  Quick Release Adaptor Plate: the top of the 

plate

 should be placed no higher than 

48 in/122 cm. Do not place anything other than the Freestyle, probe batteries, and probes 

on this mount.

2.  Handle: the top of the Handle should be placed no higher than 40 in/101 cm from the 

floor. 

3. 

Keyboard Shelf: should be placed no higher than 33 in/84 cm from the floor.

4.  Rear Storage Basket: the top of the basket should be placed no higher than 30 in/76 cm 

from the floor. Weight limit 4 lbs/1.8 kg.

5.  Front Storage Basket: top of basket should be placed no higher than 24 in/61 cm from the 

floor. Weight limit 4 lbs/1.8 kg.

6.  Cable Wrap: should be placed no higher than 22 in/56 cm.
7. 

Video Printer Shelf: the shelf should be placed no higher than 12 in/30 cm from the floor. 

Weight limit 6 lbs/2.7 kg. Secure printer with straps. 

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments