manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 60 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 60

2-40         

ACUSON

 Freestyle User Manual

Safety and Care

Battery Safety

The 

ACUSON

 Freestyle contains rechargeable lithium ion batteries in the System Console. 

These batteries are not accessible by the operator and may only be replaced or serviced by a 

qualified service technician. 

The 

ACUSON

 Freestyle probe also utilizes a rechargeable lithium ion battery. This is enclosed 

in the removable battery pack.
To prevent the probe battery from bursting, igniting, or emitting fumes and causing personal 

injury or equipment damage, observe the following precautions.

WARNING: 

Use only batteries supplied by Siemens Medical Solutions USA, Inc. with the 

system and probe.

WARNING: 

Do not disassemble or alter the battery pack or remove the casing of the 

pack.

WARNING: 

The battery contains safety circuitry and features. Do not disassemble or 

alter the battery. 

WARNING: 

Charge batteries only when the ambient temperature is between 0º and 

40º C (32º and 104º F).

WARNING: 

Do not short-circuit the battery by directly connecting the positive and 

negative terminals with metal objects.

WARNING: 

Do not heat the battery or discard it in a fire.

 

WARNING: 

Do not use a defective battery or a battery that appears to be malfunctioning 

or not holding a charge. Replace such batteries.

WARNING: 

Do not expose the battery to temperatures over 60º C (140º F). Keep it away 

from fire and other heat sources. 

WARNING: 

Do not leave the battery in direct sunlight. 

WARNING: 

Do not pierce the battery with a sharp object, hit it, or step on it. 

WARNING: 

Do not use a damaged battery, or a battery pack with cracks or damage to 

the casing. 

WARNING: 

Do not solder a battery

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments