manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 111 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 111

ACUSON

 Freestyle User Manual   

6-3

Wireless Probes

Overview

When the system is operated in “wireless mode” the probe Cable Adapter is not used; 

instead, the probe and console communicate wirelessly. To obtain successful results scanning 

wirelessly, follow the instructions provided here. 

NOTE: 

Consult the Safety chapter and System Reference manual for important 

information about wireless operation and electromagnetic compatibility issues 

associated with the system. 

NOTE: 

See the Safety chapter and System Reference manual for important 

information about the ACUSON

 Freestyle wireless probe specifications, 

electromagnetic compatibility considerations, and security features.  

Antenna Locations

The probe antennas are located towards the back of the probe (the back is the part with the 

probe controls). If possible, keep your hand away from this area for optimal operation. 
Additional antennas are also located in the midsection of the probe. 
The system antennas are located in the upper left corners of the console. Maintain an 

unblocked line of sight between the probe and the console for optimal operation. 

2

1

Location of Probe Antennas on Probe and Console

1.  Probe antennas
2.  Console antennas

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments