manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 65 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 65

ACUSON

 Freestyle User Manual   

 2-45

Safety and Care

System Upgrades

Performing System Software Upgrades

When performing system software upgrades, carefully follow the installation instructions that 

accompany the software.

CAUTION: 

Back up or archive any patient studies that may be stored on the system prior 

to performing a software upgrade.

CAUTION: 

Do not  terminate power during a software upgrade or otherwise interrupt a 

software upgrade. This may cause the system not to operate and may require system 

servicing. When conducting a software upgrade, operate the system on AC Mains power 

outlet and make sure the system battery is fully charged.

Consult your service representative or help desk contact with any questions you may have 

regarding software upgrades. 

Environmental Protection

Product Recycling and Disposal

Dispose of this product according to local, state, and regional regulations.
Batteries and electrical and electronic equipment can contain hazardous substances. If 

released, the hazardous substances can harm people and the environment.
Siemens provides disassembly instructions to treatment facilities for the safe and proper 

removal and recycling of electrical and electronic components in this product. For more 

information, contact your local Siemens representative.
To the extent required by local laws and regulations, Siemens has programs for the return of 

used products. For more information, contact your local Siemens representative.

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments