manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 137 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 137

ACUSON

 Freestyle User Manual   

8-11

Connectivity

Freestyle Mobile Link App

NOTE: 

Images displayed using the App are for informational purposes only and are 

not intended for diagnostic use.

For instructions on using the Mobile Link App on a mobile device, see the instructions provided 

with the App.

Freestyle Mobile Link Settings

Freestyle Mobile Link App Settings

Function

Instructions

Additional Information

Enable Mobile Link

Select: 

SETUP

 / 

SYSTEM

 / 

ADMIN

.

Check the Enable Mobile App checkbox.

The App links using the WiFi connection. 

When the Mobile Link App is 

Enabled

, the 

mobile symbol appears on the console 

imaging screen:

To disable the Mobile Link, uncheck the box.

Set Security 

PIN Code

Note that the PIN code specified here must 

also be entered on the Windows mobile 

device in order to link to the Freestyle.

Select: 

SETUP

 / 

SETTINGS

 / 

NETWORK

.

Go to the Mobile Link section.
Select: PIN Code.
Enter a four-digit PIN Code.

 

 

After entry, the PIN code is not displayed.

Confirm Port 

Number

The port number entered for the Freestyle 

must be the same as the number entered in 

the App.

If the port number is changed, the Freestyle 

must be restarted.

Activate New Patient 

Study from App

After sending patient study information from 

the App, select 

NEW PATIENT

 / 

WORKLIST

.

Highlight the patient entry and select 

Create 

Study

.

—

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments