manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 57 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 57

ACUSON

 Freestyle User Manual   

 2-37

Safety and Care

Approved List of Disinfectants

The following matrix provides a list of approved disinfectants for all probes.

NOTE: 

The approved disinfectants, such as Cidex OPA, may discolor probe 

housings, including the face of the probe. There is no associated degradation of 

imaging performance or probe reliability.

Compatible Disinfectants for the System Console and Probe are listed below. Use of 

disinfectants not listed may cause damage to the system and void the warranty.

System Console

Name

Description

abcoCIDE 14

Gluteraldehyde

abcoCIDE 28

Gluteraldehyde

Asepti-Wipe

Quaternary Ammonia

Cidex

Gluteraldehyde

Cidex OPA

Ortho-phthaldehyde

Cidex Plus

Gluteraldehyde

MetriCide 14

Gluteraldehyde

MetriCide 28

Gluteraldehyde

T-Spray

Quaternary Ammonia

T-Spray II

Quaternary Ammonia

Probe

Name

Description

abcoCIDE 14

Gluteraldehyde

abcoCIDE 28

Gluteraldehyde

Cidex

Gluteraldehyde

Cidex Plus

Gluteraldehyde

MetriCide 14

Gluteraldehyde

MetriCide 28

Gluteraldehyde

Wavicide-01

Gluteraldyhyde

Metrizyme

Propylene glycol

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments