manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 40 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 40

2-20         

ACUSON

 Freestyle User Manual

Safety and Care

Implantable Devices

WARNING: 

Ultrasound systems, like other medical equipment, use high-frequency 

electrical signals that can interfere with implantable devices such as pacemakers and 

implantable cardioverter-defibrillators (ICDs). If the patient has such an implantable 

device, you should be aware of any interference in its operation and immediately power 

off the ultrasound system.     

WARNING: 

The probe battery and probe adapter cable well at the back of the probe, 

away from the transducer end (see illustration) into which the probe battery or cable 

adapter are placed, contains magnets used to secure the probe battery and cable 

adapter. Keep this end of the probe at least 3 cm (1.3 inches) away from implanted 

cardiac rhythm devices. 

2

1

Probe battery (showing connector side); insert with battery connectors facing down

1.  Probe battery/cable adapter well
2.  Location of magnets

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments