Siemens ACUSON Freestyle User Manual Download Page 23

Page: 23 / 138

ACUSON

Freestyle User Manual

2-3

Safety and Care

Operating Safety and Environment

Do not operate the ultrasound system until you fully understand the safety considerations and

procedures presented in this manual.

WARNING:

Failure to comply with Warnings may pose a threat to patient and/or user

safety.

Labels

For information regarding product labels, see the

System Reference Manual

System Symbols

Refer to this table to identify important symbols located on the ultrasound imaging system and

transducers.

NOTE:

Some symbols in this table may not be used in your system.

Symbol

Explanation

Caution: Risk of electric shock.

Consult instructions for use

Caution

General Warning
(yellow and black illustration)

Standby — ON

USB Connection

Ethernet 10/100BaseT/1000BaseT Connection

Type B Applied Part

Summary of Contents for ACUSON Freestyle











































































































































Search results

Summary of Contents for ACUSON Freestyle

Reviews:

Siemens ACUSON Freestyle, User Manual, Page: 23 / 138

Search results

Summary of Contents for ACUSON Freestyle

Reviews: