manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 107 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 107

ACUSON

 Freestyle User Manual   

5-17

Scanning

Area Measurement

To perform an area measurement:
1.  Activate the Area function by selecting 

AREA

 from the 

MEASURE

 sub-menu.

2.  Position the cross-hair cursor at the starting point by pressing the left Trackball button. 

NOTE: 

If you have selected the continuous trace method in the 

SETUP

 / 

SYSTEM

 / 

ADMIN

 page, use the Trackball to trace the area. 

3.  While drawing you can reverse direction using the right Trackball key to back up and 

delete parts of the trace. If you have selected the point-to-point method in the 

SETUP 

/ 

SYSTEM 

/ 

ADMIN

 page (by disabling Continuous Trace), use the Trackball to position the 

cursor, and the left Trackball button to set multiple points. 

4. 

To complete the measurement, leave at least a small gap between your finishing point 

and the starting point, and press the left Trackball button twice. The system will complete 

the trace and display the result next to the trace.

NOTE: 

It is possible to perform measurements on images being viewed from the 

Study List, but the measurements cannot be saved in this case. 

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments