manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 6 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 6

vi         

ACUSON

 Freestyle User Manual

 

Conventions

Read and understand these conventions used in this manual.

Warnings, Cautions, and 

Notes

 

WARNING

: Warnings are intended to alert you to the 

importance of following the correct operating procedures where risk 

of injury to the patient or system user exists.

 

CAUTION

: Cautions are intended to alert you to the 

importance of following correct operating procedures to prevent the 

risk of damage to the system.

Note

:  Notes contain information concerning the proper use of the 

system and/or correct execution of a procedure. 

Probe and Transducer

In accordance with ultrasound convention, these terms can be 

interchangeable. For the ACUSON Freestyle, in this manual:
• 

Probe

 typically refers to the entire assembly of the handheld 

scanning module which includes the probe transducer, electronics, 

controls, and battery. 

• 

Transducer

 typically refers to the scanning array at the tip of the 

probe. 

Key Text

There are two types of Soft Keys on the system and they are 

formatted differently in this manual:
•  Bottom Soft Keys and their menu and sub-menu items: for 

example, 

SETUP

, 

VIEW

, 

SETTINGS

 (formatting: bold, all caps).

•  Real-time Control Bar Soft Keys and their menus and sub-menu 

items: for example 

Freeze

, 

Save Exam

, 

Vascular

 (formatting: 

bold, with gray bar).

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments