manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 46 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 46

2-26         

ACUSON

 Freestyle User Manual

Safety and Care

Maintenance

CAUTION: 

Electrical safety tests must also be performed at regular intervals as specified 

by local safety regulations, or as needed.

Repair

WARNING: 

No modification of this equipment is allowed.

 

For questions regarding repair or replacement of any equipment parts on your system, contact 

your Siemens service representative.

Siemens Authorized Care

Installers and operators must observe any statutory regulations that govern the installation, 

operation, inspection, and maintenance of this equipment.
Perform inspections and maintenance at the prescribed intervals to avoid worn and hazardous 

parts due to wear. 
As manufacturers and installers of ultrasound equipment, Siemens cannot assume 

responsibility for the safety properties, reliability, and/or performance of the equipment, if:

 

■ Installations, extensions, readjustments, modifications, additions, or repairs are carried out 

by persons not specifically authorized by Siemens.

 

■

Components that affect the safe operation of the system are replaced by parts not 

authorized by Siemens.

 

■

The electrical installation of the room where the equipment is located does not meet the 

power and environmental requirements stated in this manual.

 

■

The equipment is not used in accordance with the operating instructions.

 

■

The system is operated by personnel not adequately educated or trained.

Siemens suggests that you request any person who performs maintenance or repairs to 

provide you with a certificate showing:

 

■

The nature and extent of the work performed

 

■

Changes in rated performance

 

■

Changes in working ranges

 

■

Date of service

 

■ Name of person or firm performing the service

 

■

Signature of person performing the service

Technical documentation pertinent to the ultrasound system is available at an additional 

charge. However, this does not in any way constitute an authorization to conduct repairs or 

maintenance. Siemens refuses all responsibility whatsoever for repairs that are performed 

without the express written consent of the Siemens service department.

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments