manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 90 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 90

 Installation

90/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9 

 

                                                                                                                                                                            

➭ Clean the sealing ring ⑥ removed from the panel connection housing, and grease it 

uniformly with the supplied mounting paste (e.g. Polylub GLY 801, 0.40 kg).

➭ Insert the sealing ring ⑥ in the groove of the cover of the panel connection housing ④ . 

Fig. 95:

Inserting the sealing ring

➭ Grease the contact laminations ⑬ with mounting paste Vaseline 8422 DAB 8 

(order number: 8BX2091).

Fig. 96:

Greasing the socket

➭ Push the cover of panel connection housing ④ into the panel connection housing ⑤ . 

Fig. 97:

Inserting the cover of the panel connection housing

NOTE

In other panel connection versions, the plug sockets may be arranged asymmetrically.

➭ If the plug sockets are arranged asymmetrically, observe the mounting direction of the 

cover of the panel connection housing.

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments