manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 106 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 106

 Installation

106/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9 

 

                                                                                                                                                                            

➭ Lower the primary terminal of the voltage transformer slowly onto 

the panel connection housing.

➭ To let excess air out of the plug connection while mounting the voltage transformer, 

fit a nylon thread or a cable strap into the inside cone of the panel connection cover.

➭ Insert the primary terminal of the voltage transformer slowly into the inside cone of the 

panel connection cover, pulling the cable strap out at the same time.

➭ Fit plain washers on the threaded rods of the fixing bracket stecken. Bolt the voltage 

transformer uniformly together with the panel connection cover using the M10 nuts. 
Tightening torque: 30 Nm.

Fig. 114: Bolting the voltage transformer together

➭ Connect the low-voltage plug connector to the voltage transformer.

Fig. 113: Mounting the voltage transformer

①

Cable strap

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments