manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 195 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 195

 864-5091.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • Revision 06

195/214

Operation

                                                                                                                                                         

Decoupling the busbar section (system 1)

1

Initial situation

2

➭ Push the left-hand control gate to the left.

3

➭ Switch the three-position disconnector to OPEN position (insert the 

operating lever for the DISCONNECTING function and turn 180° 
counter-clockwise).

4

➭ Remove the operating lever for the DISCONNECTING function.
The left-hand control gate returns to its initial position.

5

➭ Push the right-hand control gate to the left.

6

➭ Switch the three-position disconnector to OPEN position (insert the 

operating lever for the DISCONNECTING function and turn 
180° counter-clockwise).

7

➭ Remove the operating lever for the DISCONNECTING function.
The right-hand control gate returns to its initial position.

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments