manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 88 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 88

 Installation

88/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9 

 

                                                                                                                                                                            

➭ Undo 11 bolt-and-washer assemblies M8x40 and 1 hexagonal bolt (with plain washer and 

spring washer) at the cover of the panel connection housing ④ .

➭ Remove the panel connection housing ⑤ .
➭ Take the sealing ring ⑥ out of the groove in the cover of the panel connection housing.

➭ Remove 4 pan-head bolts, 4 nuts and 4 strain washers from the cover of the panel 

connection housing ⑦ . 

➭ Remove the cover of the panel connection housing ⑦ .

Fig. 91:

Removing the cover of the panel connection housing

Fig. 89:

Removing the cover with the plug sockets

④

Cover of panel connection housing

Fig. 90:

Removing the panel 

connection housing

④

Cover of panel connection housing

⑤

Panel connection housing

⑥

Sealing ring

NOTE

Do 

not

 reuse the removed pan-head bolts, strain washers and nuts.

➭ Dispose of the pan-head bolts, strain washers and nuts in an environmentally 

compatible way.

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments