manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 116 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 116

 Installation

116/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9 

 

                                                                                                                                                                            

28.3

Solid-insulated bar (V-type bar)

Solid-insulated bar with three-position disconnector

➭ Remove the covers ① and sealing rings. To do this, remove the 6 bolts M8 x 45 

(including washer and spring washer) and the M10 nuts.

Fig. 125: Removing the covers ① and sealing rings

Fig. 124: Overview of busbar component: Solid-insulated bar 

with three-position disconnector

①

Solid-insulated bar with integrated pressure ring

②

Connection housing for solid-insulated bar

③

Busbar housing

④

Busbars

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments