Siemens 8DB10 Installation And Operating Instructions Manual Download Page 156

Page: 156 / 214

Operation

156/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9

➭ Pre-select busbar system for switching operation.

Selector gate to the left: Busbar system 1. Selector gate to the right: Busbar system 2 .

➭ Push the left-hand control gate to the right.
✔ The opening for the READY-TO-EARTH function is free.

➭ Switch the three-position disconnector to READY-TO-EARTH position (insert the operating

lever for the READY-TO-EARTH function and turn 180°

clockwise

✔ The earthing switch is closed.

✔ The position indicator changes to READY-TO-EARTH position.

➭ Remove the operating lever for the READY-TO-EARTH function.
✔ The left-hand control gate returns to its initial position.

✔ The opening for the READY-TO-EARTH function is closed.

➭ Close the circuit-breaker (see page 148, "Circuit-breaker operation").

Fig. 180: Operating the three-position disconnector for the READY-TO-EARTH function

DANGER

Danger! High voltage! The earthing process is

not

completed until the circuit-breaker is closed.

➭ Close the circuit-breaker after having switched the three-position disconnector to READY-

TO-EARTH position.

Summary of Contents for 8DB10























































































































































































































Search results

Summary of Contents for 8DB10

Reviews:

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 156 / 214

Search results

Summary of Contents for 8DB10

Reviews: