manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 111 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 111

 864-5091.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • Revision 06

111/214

Installation

                                                                                                                                                         

27.3

Removal of voltage transformers type 4MT7 from the cable feeder

➭ Isolate and earth the cable feeder.
➭ Verify safe isolation from supply.
➭ Remove the voltage transformer. To do this, remove the 4 bolts of the fixing brackets at 

the panel connection cover, bolt size M10.

Fig. 120: Removing the voltage transformer

Fig. 119: 4MT7 voltage transformer

①

Panel connection housing

②

Inside-cone bushing for primary 
terminal of transformer

③

Primary terminal at the voltage 
transformer

④

Silicone adapter

⑤

Fixing bracket (fixed at the voltage 
transformer housing)

⑥

4MT7 voltage transformer

⑦

Low-voltage plug connection

⑧

Inside-cone bushing for cable

⑨

Panel connection cover

ATTENTION

Risk of injury! While being removed from the bushing, the voltage transformer can detach 
suddenly.

➭ Remove the voltage transformer uniformly downwards.
➭ Do not use excessive force.

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments