manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 192 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 192

 Operation

192/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9 

 

                                                                                                                                                                            

42.3

Switching operations in the bus coupler panel

Coupling systems 1 and 2

1

Initial situation

2

➭ Push the selector gate to the right.

3

➭ Push the right-hand control gate to the left.

4

➭ Switch the three-position disconnector to CLOSED position (insert the 

operating lever for the DISCONNECTING function and turn 180° 
clockwise).

5

➭ Remove the operating lever for the DISCONNECTING function.
The right-hand control gate returns to its initial position.

6

➭ Push the selector gate to the left.

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments