manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 198 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 198

 Operation

198/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9 

 

                                                                                                                                                                            

Earthing the busbar section (system 2)

1

Initial situation

2

➭ Push the right-hand control gate to the left.

3

➭ Switch the three-position disconnector to CLOSED position (insert the 

operating lever for the DISCONNECTING function and turn 180° 
clockwise).

4

➭ Remove the operating lever for the DISCONNECTING function.
The right-hand control gate returns to its initial position.

5

➭ Push the left-hand control gate to the right.

6

➭ Switch the three-position disconnector to READY-TO-EARTH position 

(insert the operating lever for the READY-TO-EARTH function and turn 
180° clockwise).

7

➭ Remove the operating lever for the READY-TO-EARTH function.
The left-hand control gate returns to its initial position.

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments