manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 112 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 112

 Installation

112/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9 

 

                                                                                                                                                                            

➭ Remove the voltage transformer slowly downwards.
➭ Lower the voltage transformer so that it does not lie on the primary terminal, and protect it 

against damages and pollution using a suitable cover.

➭

For voltage tests:

 Close the inside-cone bushings at the switchpanel pole with surge-proof 

dummy plugs size 2 (3), and bolt tight using 3 bolts M8 each.

Fig. 121: Mounting surge-proof dummy plugs

ATTENTION

Risk of injury! The voltage transformer type 4MT7 has a weight of approx. 35 kg.

➭ Secure the voltage transformer against falling down.
➭ If necessary, transport the voltage transformer with several persons or with suitable aids.
➭ If necessary, support the voltage transformer with a suitable facility.

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments