manualshive.com logo in svg

Siemens 8DB10, Installation And Operating Instructions Manual, Page: 194 / 214

Share
Download
Siemens 8DB10 Installation And Operating Instructions Manual Download Page 194

 Operation

194/214

Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9 

 

                                                                                                                                                                            

42.4

Switching operations in top-mounted bus sectionalizer, system 1

Coupling busbar sections (system 1)

1

Initial situation

2

➭ Push the left-hand control gate to the left.

3

➭ Switch the three-position disconnector to CLOSED position (insert 

the operating lever for the DISCONNECTING function and turn 180° 
clockwise).

4

➭ Remove the operating lever for the DISCONNECTING function.
The left-hand control gate returns to its initial position.

5

➭ Push the right-hand control gate to the left.

6

➭ Switch the three-position disconnector to CLOSED position (insert the 

operating lever for the DISCONNECTING function and turn 180° 
clockwise).

7

➭ Remove the operating lever for the DISCONNECTING function.
The right-hand control gate returns to its initial position.

Summary of Contents for 8DB10























































































































































































































Reviews:

No comments