manualshive.com logo in svg

Siemens 8DA10, Installation And Operating Instructions Manual, Page: 92 / 214

Share
Download
Siemens 8DA10 Installation And Operating Instructions Manual Download Page 92

 Installation

92/214

Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9 

 

                                                                                                                                                                            

➭ To simplify installation, bolt the three busbars together using one bar support 

(if not pre-assembled at the factory)

Fig. 101: Inserting the busbars

➭ Interconnect the busbars and bolt them together at the twin busbar connection.

Fig. 102: Bolting busbars together

➭ Tighten the bolts lightly. The busbar sections must still be able to move.
➭ Repeat the operations until all busbar housings are mounted.
➭ Tighten the fixing bolts of all busbars and fixed contacts at all panel joints of the switchgear. 

Tightening torque: 40 Nm.

➭ Finally fit the protective caps on the bolted busbar joints.
➭ Mount the housing covers.

Summary of Contents for 8DA10























































































































































































































Reviews:

No comments