manualshive.com logo in svg

Siemens 8DA10, Installation And Operating Instructions Manual, Page: 159 / 214

Share
Download
Siemens 8DA10 Installation And Operating Instructions Manual Download Page 159

 861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11

159/214

Operation

                                                                                                                                                         

Connecting the feeder to the busbar

1

Initial situation

2

➭ Push the interrogation lever downwards.

3

➭ Push the control gate to the left.

4

➭ Switch the three-position disconnector to 

CLOSED position (insert the operating lever for 
the DISCONNECTING function and turn 180° 
clockwise).

5

➭ Remove the operating lever for the 

DISCONNECTING function.

The interrogation lever and the control gate return to 
their initial position.

6

➭ Close the circuit-breaker.

Summary of Contents for 8DA10























































































































































































































Reviews:

No comments