manualshive.com logo in svg

Siemens 8DA10, Installation And Operating Instructions Manual, Page: 153 / 214

Share
Download
Siemens 8DA10 Installation And Operating Instructions Manual Download Page 153

 861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11

153/214

Operation

                                                                                                                                                         

34.3

Operating tools

The operating levers for the three-position disconnector functions DISCONNECTING and 
READY-TO-EARTH have a slot and a nose, which are arranged in such a way that the levers can 
only be used for their respective function. The emergency operating lever only has a slot and 
may exclusively be used as described (see page 187, "Emergency operation of the three-
position disconnector").

Fig. 185: Operating lever for 

DISCONNECTING function

Fig. 186: Operating lever for 

READY-TO-EARTH function 

(cross bar marked red)

Fig. 187: Adapter for emergency operation 

(to be used only with motor operating 

mechanism)

Fig. 188: Hand crank for charging 

the closing spring

Fig. 189: Double-bit key 3 mm 

(door of low-voltage compartment)

Summary of Contents for 8DA10























































































































































































































Reviews:

No comments