manualshive.com logo in svg

Siemens 8DA10, Installation And Operating Instructions Manual, Page: 59 / 214

Share
Download
Siemens 8DA10 Installation And Operating Instructions Manual Download Page 59

 861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11

59/214

Installation

                                                                                                                                                         

20.6

Aligning the switchgear

➭ Align the first transport unit (end panel) completely and bolt it to the foundation 

(see page 43, "Constructional data of the foundation").

➭ Just align the other transport units (panels) roughly first.
➭ Keep a distance of at least 500 mmbetween the transport units for the subsequent 

installation work. 

If not all parts of the switchgear can be brought into the switchgear room before installation 
due to the little space available, proceed as follows:

➭ Place as many transport units as possible side by side.
➭ Mount these transport units.
➭ Put other transport units on the free space left, etc.

Fig. 36:

Position of the transport units 

after erection

①

First transport unit, completely aligned

②

Min. distance 500 mm

③

Other transport units, roughly aligned

Summary of Contents for 8DA10























































































































































































































Reviews:

No comments