manualshive.com logo in svg

Siemens 8DA10, Installation And Operating Instructions Manual, Page: 160 / 214

Share
Download
Siemens 8DA10 Installation And Operating Instructions Manual Download Page 160

 Operation

160/214

Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9 

 

                                                                                                                                                                            

Disconnecting the feeder from the busbar

1

Initial situation

2

➭ Open the circuit-breaker.

3

➭ Push the interrogation lever downwards.

4

➭ Push the control gate to the left.

5

➭ Switch the three-position disconnector to OPEN 

position (insert the operating lever for the 
DISCONNECTING function and turn 180° counter-
clockwise).

6

➭ Remove the operating lever for the 

DISCONNECTING function.

The interrogation lever and the control gate return to 
their initial position.

Summary of Contents for 8DA10























































































































































































































Reviews:

No comments