861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11
135/214
Installation
Connecting the STG plug with the VBSTB4 modular terminal
For 2-, 4- and 10-pole STG plugs make PHOENIX CONTACT, observe the instructions for
installation and removal given hereafter.
Mounting the STG plug
➭ Hold the STG plug horizontally over the plug shaft of the VBSTB4 modular terminal.
➭ Push the STG plug horizontally into the modular terminal until the STG plug latches in.
✔ The STG plug is latched into the modular terminal and mounted.
Removing the STG plug
➭ Push the STG plug slightly to the screwing side until the latching noses come out of
the latching slots of the modular terminal.
➭ Pull the STG plug horizontally out of the VBSTB4 modular terminal.
✔ The STG plug is removed.
29.3
Mounting the metal covers
➭ Screw all metal covers to the frames again.
INFORMATION
The information stated herein refers to the user instructions of PHOENIX CONTACT.
The user is obliged to inform himself about the latest state of the instructions before
installation or removal of the STG plugs, and to observe the manufacturer's instructions.
➭ Manufacturer's site: https://www.phoenixcontact.com