manualshive.com logo in svg

Siemens 8DA10, Installation And Operating Instructions Manual, Page: 168 / 214

Share
Download
Siemens 8DA10 Installation And Operating Instructions Manual Download Page 168

 Operation

168/214

Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9 

 

                                                                                                                                                                            

Earthing the busbar section in the left-hand panel

1

Initial situation

2

➭ Push the interrogation lever downwards.

3

➭ Push the left-hand control gate to the left.

4

➭ Switch the left-hand three-position disconnector to CLOSED position 

(insert the operating lever for the DISCONNECTING function and turn 
180° clockwise).

5

➭ Remove the operating lever for the DISCONNECTING function.
The interrogation lever and the left-hand control gate return to their initial 
position.

6

➭ Push the right-hand control gate to the right.

Summary of Contents for 8DA10























































































































































































































Reviews:

No comments