manualshive.com logo in svg

Siemens 8DA10, Installation And Operating Instructions Manual, Page: 86 / 214

Share
Download
Siemens 8DA10 Installation And Operating Instructions Manual Download Page 86

 Installation

86/214

Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9 

 

                                                                                                                                                                            

➭ Remove the busbars ④ linked to the twin busbar connection. To do this, remove the four 

hexagon nuts M10 with plain washers ① . Secure the two links ② against falling down, and 
take the three busbars ④ out carefully.

➭ To remove the earthing lug ② , unscrew the two hexagon head bolts M12x30 with plain 

washers.

Fig. 88:

Removing the busbar

①

Hexagon nut M10 with plain washer

②

Link

③

Twin busbar link (called supporting angle hereafter)

④

Busbars

Fig. 89:

Removing the earthing lug

①

Busbar housing 
(upper row)

②

Earthing lug

③

Busbar housing 
(lower row)

Summary of Contents for 8DA10























































































































































































































Reviews:

No comments