Electrical connection
8.3 System integration
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
255
Temperature sensor connection - standard
Connect the signal cable as follows:
●
Using a plug connector at the SME12x (Sensor Module External)
●
With open cable ends at the TM120
The SME12x or the TM120 is connected to the converter via DRIVE-CLiQ. Refer to the
diagrams for "System integration (Page 245)" and the following connection overviews.
Note
Checking the shutdown circuit
Before commissioning and switching on for the first time, carefully check that the Temp-S
temperature monitoring circuit correctly shuts down the system when it responds via the
SME12x or the TM120.
Typical characteristic R(
ϑ
) of a PTC temperature sensor according to DIN 44081 is provided
in Chapter "Technical features of temperature sensors (Page 75)".
The following diagram shows a connection overview with a PTC 130 °C connected via
SME12x or TM120.
Figure 8-7
Connection overview
Summary of Contents for 1FW6092-2PC15-6AB3
Page 1: ...1FW6 High Speed built in torque motors ...
Page 2: ......
Page 299: ......
Page 300: ......