Siemens 1FW6092-2PC15-6AB3 Configuration Manual Download Page 71

Page: 71 / 300

1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3

Motor components and options

4.1

Motor components

4.1.1

Overview of the motor construction

The built-in torque motor contains the following components:

●

Stator

The stator comprises an iron core and a 3-phase winding.

The winding is encapsulated to ensure that the heat loss can be dissipated more

effectively. For liquid cooling, the motor is provided with water as the coolant (main

cooler). The system design depends on the frame size (external diameter) of the motor,

see the "Cooling method" table at the end of this chapter.

●

Rotor

The rotor is the reaction part of the motor and consists of a cylindrical hollow shaft made

of steel and an iron core with integrated magnets.

●

Cooling connection adapter (option)

For motors with integrated cooling, you can connect the main and precision cooler in

parallel to the cooling unit via a cooling connection adapter.

Summary of Contents for 1FW6092-2PC15-6AB3













































































































































































































































































































Search results

Summary of Contents for 1FW6092-2PC15-6AB3

Reviews:

Brands by name

Popular brands

Siemens 1FW6092-2PC15-6AB3, Configuration Manual

Search results

Summary of Contents for 1FW6092-2PC15-6AB3

Reviews:

Brands by name

Popular brands