SIEB & MEYER CNC 0610510, Hardware Description

Page: 76 / 101

Option Modules
:
76 Hardware Description CNC 0610510/12 CNC 61.00
10.1.5 X13/X14 - Two Analog Inputs (12 bits)
This option provides two independent analog inputs with a resolution of 12 bits (11
bits plus sign), which can be used in the software (application program).
X13 - Analog Input 1/2
X 9-pole female Submin D connector
X Input resistance approx. 5 k
Ω
X Input voltage from -10 V to +10 V (reference ground)
X14 - Analog Input 2
X 9-pole female Submin D connector
Software (Example)
The analog inputs can be addressed with four system variables.
T_ACT [-2048..2047], T_ACT2 [-2048..2047]
The analog input values are mapped on these parameters. –10 volts at the input cor-
respond to T_ACT=-2048; +10 volts at the input correspond to T_ACT=+2047.
T_Offset [-2048..2047], T_Offset2 [-2048..2047]
These parameters define the offsets for both analog inputs. A deviation to the zero
point of the analog input value can be compensated by entering the actual converter
value (T_ACTx of the unloaded inputs) into this parameter.
Pin I/O Function
1 I Analog input 1
2 I Analog input 2
3
4
5
6
7
8
9 GND
Pin I/O Function
1 I Analog input 2
2
3
4
5
6
7
8
9 GND
1
5
6
9
1
5
6
9