SIEB & MEYER CNC 0610510, Hardware Description

Page: 101 / 101

:
Appendix: Revisions
CNC 61.00 Hardware Description CNC 0610510/12 101
13 Appendix: Revisions
This appendix describes alterations in comparison with previous versions of the man-
ual.
CNC 61.00 Series CNC 61.05.10/12 Hardware Description
061-cnc-tec61.05.10/12/R001-SM-EN-hg/tm/ac/she
November 28, 2003
Separation of the documentation for the two devices 61.05.10/12 and 61.05.20 with
adequate adaptation and modification of technical drawings and data.
Modification of nearly all the figures and technical drawings.
The chapter "Electric Performance Dimensioning” has been added.
CNC 61.00 Series CNC 61.05.10/12 Hardware Description
061-cnc-tec61.05.10/12/R002-SM-EN-hg/tm/ac/she
July 15, 2005
The technical data have been modified. Completely revised.
CNC 61.00 Series CNC 0610510/12 Hardware Description
061-cnc-tec61.05.10/12/R003-SM-EN-hg/tm/ac/she
February 9, 2006
Completely revised.
CNC 61.00 Series CNC 0610510/12 Hardware Description
061-cnc-tec61.05.10/12/R004-SM-EN-hg/tm/ac/she/sli
December 12, 2006
The technical drawings and the technical data has been revised.
CNC 61.00 Series CNC 0610510/12 Hardware Description
061-cnc-tec61.05.10/12/R005-SM-EN-hg/tm/ac/she/sü
October 17, 2007
Chapter „Functional Description of the Connectors and Interfaces“ /
„General Information Regarding the Wiring“:
The requirements towards the motor cable were added.
CNC 61.00 Series CNC 0610510/12 Hardware Description
061-cnc-tec61.05.10/12/R005-SM-EN-hg/tm/ac/she/sü/uh
January 13, 2009
Option module 061020043X changed.