![background image](http://html1.mh-extra.com/html/sick/lcur1-411/lcur1-411_operating-instructions-manual_1264567057.webp)
Operating instructions
Chapter
8
LCUR1411
8011281/TF99/2013-02-28
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
57
Fault diagnosis
8
Fault diagnosis
The LCUR1411 interface unit comprises various standardised sub-components (see
Figure 7-1). It is only possible to establish correct function in the system with a C4000
Standard/Advanced safety light curtain connected.
If malfunctions should occur, for instance during commissioning or in the operating phase,
please check the components listed in the following.
8.1
Fault diagnosis on the C4000 safety light curtain
First check the correct connection of C4000 sender and C4000 receiver to the LCUR1411
as per chapter 5.3.
If you cannot find the cause of the fault here, note the procedure for fault diagnosis in the
SICK operating instructions “C4000 Standard/Advanced Safety Light Curtain”, chapter
“Fault diagnosis”.
Here you will find descriptions
of the error codes (LED and 7-segment display)
of the possible causes of the fault
of the extended diagnosis features of the CDS software
Fig.14: Function elements of
the LCUR1411
UE402A0010S01
switching amplifier
LCUVS1K-A function
decoder
A SNE4003KA-111
safety relay (relay
outputs)
Terminal block
Power supply 24 V DC