![background image](http://html1.mh-extra.com/html/sick/lcur1-411/lcur1-411_operating-instructions-manual_1264567050.webp)
Chapter
5
Operating instructions
LCUR1411
50
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8011281/TF99/2013-02-28
Electrical installation
Explanation of the possible selections in operating mode 2 “single break PSDI”:
“Standard (interruption and reset)” signifies:
ESPE switches to green after protective field interruption and subsequent actuation of
the reset button
“Alternative (reset and interruption)” signifies:
ESPE switches to green after actuation of the reset button and subsequent protective
field interruption
5.3.2
LVS (450 mm and larger) on filter presses with internal switching
“with/without restart interlock”
Operating mode setting, operating mode 1 to 3:
in External device monitoring (EDM) select
“Active
”
“
check Reset button active”
in “Reset performed immediately after ...”
select “Press and release”
in “Connection of the reset button” select
“at the system plug”
Set scanning range in m to suit the distance between sender/receiver using the list box
set required operating mode as per the following table; you can obtain an additional
operating mode using “Add operating mode”
Operating mode 1:
Operating mode 2:
Operating mode 3:
“MCC-TDC sampling in protective operation”
n/a
The restart interlock
function must be set to
“Internal”
The restart interlock function
must be set to
“External”
On switching from operating mode 2 to operating mode 1 by the machine controller, the
machine is stopped, as the C4000 Standard/Advanced safety light curtain switches to the
safe state (can be seen from the illuminated red LED). The restarting of the machine must
be acknowledged by actuating the reset button.
Note