![background image](http://html.mh-extra.com/html/sick/icr880-generation-3/icr880-generation-3_operating-instructions-manual_1264318034.webp)
3
PRODUCT DESCRIPTION
34
8011325/18IM/2020-07-02|SICK
O P E R A T I N G I N S T R U C T I O N S | ICR880/890
Subject to change without notice
3.6
Operating elements and displays
3.6.1
Operator interface
The camera system is configured according to the application via the SOPAS-ET
configuration software. For this purpose, the software runs on a PC, which must be
connected to one of the data interfaces of the controller unit.
Commissioning and diagnostics in the event of faults are carried out exclusively via
the SOPAS-ET configuration software. In normal operation, the system operates fully
automatically. There are no other operating elements on the camera system.
Parameter set on the SD memory card
The configured parameter values are saved as a parameter set in the internal EEPROM
of the camera and on the SD memory card of the camera (cloning). Should the camera
need replacing, the memory card enables the convenient and fast transmission of the
parameter set to the new device (see also chapter
7.2 Replacing a camera system or
Fig. 16: SD memory card for parameter set
No.
Meaning
1
Removed cover
2
SD memory card
3
Slot for the SD memory card