![background image](http://html.mh-extra.com/html/sick/icr880-generation-3/icr880-generation-3_operating-instructions-manual_1264318033.webp)
PRODUCT DESCRIPTION
3
33
8011325/18IM/2020-07-02|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | ICR880/890
3.4.10
Data interfaces
The following data interfaces are available on the camera system:
Interface
Connection
Function
CAN bus
CAN 1 (out/in)
Networking of one or more camera systems with the
controller unit
Ethernet
(alternative to
controller unit)
HOST ETHERNET
(not for ICD890-
xxxxxxxS03)
Output of the read result of the AUX interface
(AUX port)
Configuration/read diagnostics with SOPAS-ET
configuration software
Output of the read result of the host interface
(host port)
Serial auxiliary
interface
(alternative)
AUX (RS-232)
Configuration/read diagnostics.
Not designed as a permanent data output interface
(process interface) for the read result.
PC Ethernet
GBIT ETHERNET
Provision of image data of current read for further
processing
Tab. 8: Function of data interfaces
3.5
Configuration with SOPAS-ET
The SOPAS-ET configuration software can be used to configure the operating principle of
the camera system in line with the customer requirements.
The software is installed on a PC, which is generally connected to the camera system via
the controller by means of Ethernet.
You can define various settings, including:
•
Configuration of the
code position
and the
symbol contrast
.
•
Configuration of the image resolution perpendicular to the conveyor direction (digital
zoom in dpi) and in the conveyor direction (dynamic scanning frequency in lpi).
•
Configuration of the
trigger source
.
•
Configuration of the
camera focusing
(default position and source of the distance
measurement).
•
Configuration of the
illumination mode
and time-out for the illumination unit.
•
Configuration of the
position
and
inclination angle
of the camera and the deflector
mirror.
•
Configuration of the
increment source
and the resolution/speed.
•
Configuration of the
image format
and the
scaling/quality
.
•
Configuration of the code types for 1D and 2D codes.
•
Configuration of the
network parameters
.
•
Configuration of the data interfaces.
You can learn how to connect to SOPAS-ET and configure the camera system in chapter
6 Commissioning and configuration