![background image](http://html.mh-extra.com/html/sick/icr880-generation-3/icr880-generation-3_operating-instructions-manual_1264318043.webp)
MOUNTING
4
43
8011325/18IM/2020-07-02|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | ICR880/890
3. Loosen the clamping screws on the brackets or completely remove these for the time
being if necessary.
Aligning the deflector mirror
1. Align the deflector mirrors in the mounting bracket to the angular dimension required
with the aid of the five-part hole pattern or a protractor in accordance with the technical
diagram. In the majority of applications, the hole pattern covers the adjustments
needed.
Fig. 28: Mounting the deflector mirror: using the hole pattern
2. If necessary, lock the angle set in one of the two mounting brackets using a ball locking
bolt.
Locking the deflector mirror in place
1. Screw the clamping screws into the appropriate threaded holes and then tighten them.
2. Remove the protective film from the deflector mirror.
4.3.3
Mounting the camera system
Mount the illumination unit on the frame in accordance with the technical diagram by
means of the two 180° mounting brackets supplied. The position of the illumination unit
is based on the distance to the deflector mirror. The illumination unit must be aligned
parallel to the deflector mirror.
Then insert the camera into the illumination unit and secure.
WARNING
Risk of injury due to falling components
A unit consisting of the illumination unit and camera weighs up to approx. 37 kg.
Measures
Do
not
perform any mounting work alone.
Ask a second person to hold the components during mounting.
Wear safety shoes.