MOUNTING
4
41
8011325/18IM/2020-07-02|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | ICR880/890
4.3.1
Mounting brackets
To facilitate alignment, the unit consisting of the illumination unit, camera, and deflector
mirror are attached to the mounting frame by means of two 180° mounting brackets
each.
Fig. 25: 180° mounting bracket for camera system and deflector mirror
No.
Meaning
1
Mounting plate for holding the deflector mirror or camera system
2
Grooves for the alignment pins of the illumination unit/deflector mirror
3
Bore holes for fixing screws
4
Hole pattern for the fine adjustment of the deflector mirror
5
Clamping screws for adjusting the inclination angle
6
Center of rotation
7
Screws with sliding nuts for mounting on the mounting frame
The mounting frame consists of a mounting plate for holding the deflector mirror or
camera system with two fixing screws and a hole pattern for fine adjustment.
The mounting bracket is tightly screwed onto the mounting frame using two sliding nuts.
Loosening and tightening the clamping screws enables the inclination angle of the
brackets to be set between 0° and 180°. For this purpose, the clamping screws can be
screwed into different threaded holes on the circular path of the hole pattern.
It is advisable to secure the clamping screws opposite to each other (offset by 180°).
Tip
