4
MOUNTING
42
8011325/18IM/2020-07-02|SICK
O P E R A T I N G I N S T R U C T I O N S | ICR880/890
Subject to change without notice
4.3.2
Mounting the deflector mirror
Mount the deflector mirror on the frame in accordance with the technical diagram using
the two 180° mounting brackets supplied.
The position of the deflector mirror is based on the distance to the reference point in the
direction of the conveyor (perpendicular over the pivot point of the bracket) and the
inclination angle to the conveyor level. The deflector mirror must be mounted parallel to
the level of the conveyor.
NOTE
Damage to the deflector mirrors
Do not remove protective foil of the deflector mirror until mounting is complete
Mounting the mounting brackets
1. Screw a 180° mounting bracket onto both sides of the mounting frame such that the
two brackets are aligned with each other using two screws and two sliding nuts (1) on
each profile.
2. By means of the grooves, vertically position the mounting plate (3) of the mounting
brackets and tighten the clamping screws (2).
Fig. 26: Mounting the deflector mirror: attaching the 180° mounting bracket
Inserting the deflector mirror
1. Insert the deflector mirror into the mounting bracket. The handles point upwards.
2. Secure the deflector mirror to both 180° mounting brackets using two fixing screws each.
Fig. 27: Mounting the deflector mirror: inserting the deflector mirror