Collaborative Robot User Manual
Safety
Copyright © SIASUN Co., Ltd. 2019
Document Version 3.0 (2019.01)
SIASUN Proprietary and Confidential Information
7/ 54
2 Safety
2.1Introduction
This section describes important safety and risk assessments that you need to
be aware of when installing, using, and maintaining your robot and its
components. The user must read and understand this information before the
robot is powered on for the first time.
Before performing any work, be sure to read all operating instructions
provided with your equipment, in particular, instructions that may endanger
personal safety and equipment safety, such as hazards, warnings, and
cautions, to minimize the chance of an accident. When this document differs
from the documentation shipped with the device, the documentation shipped
with the device shall prevail.
The person responsible for installing and maintaining the equipment must be
a trained and trained professional who has proper methods of operation and
all safety precautions. Only trained and qualified personnel should perform
equipment installation and maintenance.
2.2Range and responsibility
This information does not include how to design, install and operate a
complete robot system, nor any peripherals that affect the overall system. In
order to protect the safety of personnel, a well-designed system must be
designed and installed in accordance with the safety requirements stipulated
in the standards and regulations of the country in which the robot is
installed.
The robot integrator is responsible for ensuring that the robot system
complies with the applicable safety laws and regulations of the country or
region in which it is located and that the necessary safety equipment for the
protection of the robot system operator is properly designed and correctly
installed.
Specifically including but not limited to the following:
Ensure that the robot system meets all basic requirements;