Si-tex SVS-1010, Operation Manual

Page: 92 / 122

- 92 -
(
☞
the default setting is hidden.)
2.1.7. TEMP Font
Select the temperature font size on the screen.
(
☞
the default setting is Large.)
2.1.8. Image Filtering
This function is reduction of the noise.
(
☞
the default setting is on.)
2.2. Color
2.2.1. Color Level
This function adjusts the colors. Make it upper level, the color becomes darker.
(
☞
the default setting is OFF.)
2.2.2. Color Rejection
There are 16 color levels for Fish finder. The color bar is on the left of the Fish finder. If the level is
higher, the color of the bar is deleted one by one.
2.2.3. Screen Color
Select he back ground color of the Fish finder for your convenience.
2.3. Pulse
Select the pulse of the output from the transducer. Levels are among Low, Medium and High, which
depends upon the depth. Low is proper to research precise a fish school but it is not suitable to
measure a deep depth. High is opposite from Low.
(
☞
the default setting is Medium.)
2.4. Output Power
Select the output from the installed transducer. Levels are from off to 3. It should be careful about the
depth. If you set high level in a shallow depth, the Fish finder screen turns to red. You see nothing
expect red on the screen.
(
☞
the default setting is 3.)
2.5. Alarm
2.5.1. Depth