Si-tex SVS-1010 Operation Manual Download Page 75

Page: 75 / 122

$background image$

- 75 -

It is to adjust the range of the off course.

(

☞

the default setting is 0.25nm.)

5.2. Anchor

5.2.1. Anchor Alarm:

It is necessary when your vessel anchors.

(

☞

the default setting is OFF.)

5.2.2. Anchor Radius:

If you vessel is out of the range of the anchor, it gives you notice with alarm.

(

☞

the default setting is 0.05nm.)

5.3. Interval

5.3.1. Interval Alarm:

It alarms every time you set.

(

☞

the default setting is OFF.)

5.3.2. Interval Time

The time is available from one minute until sixty minutes.

(

☞

the default setting is 3 min.)

5.4 User Line

5.4.1. User Line Alarm

It alarms if it breaks into the setting area.

(

☞

the default setting is OFF.)

5.4.2. User Line Radius

It sets the range of the course alarm.

(

☞

the default setting is 0.05nm.)

Summary of Contents for SVS-1010



























































































































Search results

Summary of Contents for SVS-1010

Reviews:

Related manuals for SVS-1010

Brands by name

Popular brands

Si-tex SVS-1010, Operation Manual

Search results

Summary of Contents for SVS-1010

Reviews:

Related manuals for SVS-1010

Brands by name

Popular brands