Si-tex SVS-1010 Operation Manual Download Page 87

Page: 87 / 122

$background image$

- 87 -

5. Controlling STC

1. Choose the frequency.

2. Choose the STC.

3. Twisting the rotary key to control the STC.

6. Mode

▶[

MENU]->Mode

Choose one of Three Sonar Modes

6.1. Normal

Normal mode (with Auto Range active) displays the sounder image with the surface at the top of the

screen and the sea bottom in the lower part of the screen. The depth scale indicates the depth range

appearing in the display. Bottom contours and fish echoes are displayed at the depths where they are

detected. If the depth Range is set manually to a value less than actual water depth, sea bottom

echoes are not displayed, but all other echoes within the Range setting are displayed.

6.2. Bottom Zoom

Bottom Zoom magnifies the sounder display from the sea bottom toward the surface for a short

Summary of Contents for SVS-1010



























































































































Search results

Summary of Contents for SVS-1010

Reviews:

Related manuals for SVS-1010

Brands by name

Popular brands

Si-tex SVS-1010, Operation Manual

Search results

Summary of Contents for SVS-1010

Reviews:

Related manuals for SVS-1010

Brands by name

Popular brands