- 84 -
viewing. If the “Status” shows “Test” then no further action is required as it is just a test transmission. If
the “ Status” shows “Active” it will also show the MMSI, Name and position, the SART icon should now
be displayed on your chart screen at that location. Monitor your VHF radio on Channel 16 and
establish whether any other station has received this SART message, if not take the appropriate action.
10.4. Test View
Showing the text of the SART Message.
(
☞
the default setting is off.)
10.5. Fishing net
10.5.1. Fishing net
Display the programmed Fishing net AIS target.
(
☞
the default setting is off.)
10.5.2. Select name
Program the name of Fishing Net
10.5.3. Alarm
The alarm goes off when no Fishing net AIS target is in setting range.
(
☞
the default setting is off.)
10.5.4. Alarm Radius
Setup the Fishing net alarm range.
(
☞
the default setting is 0.05nm.)
Summary of Contents for SVS-1010
