Sharp MX-M264N Operation Manual Download Page 85

Page: 85 / 799

1-44

BEFORE USING THE MACHINE

Contents

Replace the staple case.

Push the staple case in until it clicks into place.

Slide the finisher back to the right.

Gently slide the finisher back to the right until it locks into its
original position.

Close the cover.

Make a test print or copy in staple sort mode to verify that stapling takes place correctly.

Summary of Contents for MX-M264N
































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-M264N

Reviews:

Sharp MX-M264N, Operation Manual, Page: 85 / 799

Search results

Summary of Contents for MX-M264N

Reviews: